Filter
Top Products
AC Wall Socket Connection
Use the AC wall socket connection anywhere a 100–120 volt or 200–240 volt
50/60Hz AC power source is available.
1. Connect the Tip to the Adapter output cable and your notebook or digital
device, if you haven’t done so already
2. Connect the AC wall socket input cable to the Adapter
3. Plug the AC connector into a wall outlet or power strip
When the Adapter has power, its status light glows. Your notebook or digital
devices’battery is now charging. Your notebook or digital device is now powered.
Auto Connection
The Adapter’s auto connector can be used in any vehicle with a 12V DC
cigarette lighter socket, such as a car, truck, boat, or an airplane equipped with
this type of power socket. Make sure both the auto connector and the cigarette
lighter socket are clean and dry.
CAUTION: To prevent power interruption and any negative effects on the device
or its software, don’t start your vehicle’s engine while the Adapter is connected
to the device.
WARNING: Never jump start your vehicle with your Adapter connected to the
vehicle’s cigarette lighter socket. Many jump start systems use extremely high
voltages that can damage your Adapter circuitry.
70 Watt AC/DC Power Adapter for Apple Notebook • 1110 • 70 Watt AC/DC Power Adapter for Apple Notebook
WARNING: A cigarette lighter could be hot and burn your skin or flammable
materials. Allow the lighter to cool completely before storing it.
1. Remove the vehicle’s cigarette lighter from its socket.
2. Insert your Adapter’s auto connector into the cigarette lighter socket.
3. If power to the cigarette lighter socket is not already on, remove the
Adapter from the socket and start the vehicle’s engine. Then repeat step 2.
The Adapter’s status light glows when powered.
4. Connect the appropriate Tip to the Adapter output cable and plug it into your
notebook or digital device.
The notebook or digital device’s battery will start to charge. Turn on and use
your notebook or digital device.
NOTE: Using a dirty cigarette socket or auto connector might cause your vehicle’s
battery to discharge a lower voltage incapable of powering your Adapter. If your
Adapter does not turn on, its status light does not glow, unplug it from the cigarette
lighter socket and make sure both the socket and auto connector are clean and dry
before reconnecting.
NOTE: When your vehicle’s engine is off, most vehicle batteries will provide ample
power supply to your Adapter for one to two hours. The actual length of time is a
function of several variables which include the age and condition of the vehicle’s
battery, and the power demand being placed on the vehicle’s battery by the
notebook or digital device that is being powered.
33335_70WAcDc.qxd 6/20/05 11:47 AM Page 10