Filter
Top Products
English 7
Setting the security function
You can set a security code to protect your
receiver system against theft.
Registering the security code
1 Display the security code
setting screen.
On <Top Menu>:
• To clear the registered security code,
perform step
1 and press [CLR] in
<Security Code>.
2 Enter a four-digit number (1),
then confirm the entry (2).
Deletes the last entry
Cancels the setting
3 Repeat step 2 to confirm your
security code.
Now, your security code is registered.
• When the unit is being reset or
disconnected from battery, you are
required to enter the security code. Enter
the correct security code, then press
[Enter].
Activating the security
function
You can activate security function to protect
your receiver system against theft.
On <Setup>:
The security indicator on the monitor
panel flashes when the vehicle ignition
is off.
To cancel, select [OFF].
EN_GET0908-001A_MX.indb 7EN_GET0908-001A_MX.indb 7 12/11/13 11:4512/11/13 11:45