Kenwood DDX4033 Computer Monitor User Manual


 
English 75
Symptom Remedy/Cause
iPod/iPhone
No sound comes out of the
speakers.
Disconnect the iPod/iPhone, then connect it
again.
Select another source and then reselect “iPod”.
The iPod/iPhone does not turn
on or does not work.
Check the connecting cable and its connection.
Update the firmware version.
Charge the battery.
Check whether the iPod/iPhone control mode is
correctly selected. ( page 27)
Reset the iPod/iPhone.
Sound is distorted. Deactivate the equalizer either on this unit or the
iPod/iPhone.
A lot of noise is generated. Turn off (uncheck) the “VoiceOver” feature of the
iPod. For details, visit <http://www.apple.com>.
No operations are available
when playing back a track
containing Artwork.
Operate the unit after the Artwork is loaded. (
page 25)
Sound does not synchronize
with the video.
Select <iPod> for <AV Input>. ( page 50)
Videos cannot be played.
No sound of videos comes
out.
Connect USB Audio and Video cable KCA-iP202/
KCA-iP22F. Other cables cannot be used.
• Select <iPod> for <AV Input>. ( page 50)
USB
“Reading...” keeps flashing on the
screen.
Turn off the power and on again.
While playing a track, sound is
sometimes interrupted.
The tracks are not properly copied into the USB
device. Copy tracks again, and try again.
EN_GET0908-001A_MX.indb 75EN_GET0908-001A_MX.indb 75 12/11/13 11:4612/11/13 11:46