Kenwood DDX4033BT Computer Monitor User Manual


 
English 47
Registering/Changing the
functions
1 On <Top Menu>:
2
3
4 Press a steering remote
controller button to register/
change.
5 Select a function to assign.
Using the steering remote controller
You can assign the functions to the keys of the remote controller on the steering wheel.
This function is available only when your vehicle is equipped with the electrical steering
remote controller.
You can only register/change the functions while you are parked.
If your steering remote controller is not compliant, learning may not be completed and an
error massage may appear.
6 Repeat steps 4 and 5 as
necessary.
7 Press [Done].
You can have the unit learned all buttons
at a time. In that case, press the all buttons
one at a time and after pressing all of them,
touch [Done] in Steering Remote Control
Setting screen. However, new functions
cannot be learned after this operation.
When changing the function already
learned, touch the button you want to
change in step
4 and then touch to select
the changed function from the function
list.
Confirm the contents of the settable
function on the function list. You cannot
edit the function list.
Initializing the settings
1 In step 2 in the left column:
2
EN_GET0908-001A_MX.indb 47EN_GET0908-001A_MX.indb 47 12/11/13 11:4512/11/13 11:45