Kenwood DDX4033BT Computer Monitor User Manual


 
82 English
Installing the Microphone
Unit (DDX6033BT/
DDX6033BTM/DDX4033BT/
DDX4033BTM only)
1 Check the installation position of the
microphone (accessory 6).
2 Remove oil and other dirt from the
installation surface.
3 Install the microphone.
4 Wire the microphone cable up to the unit
with it secured at several positions using
tape or the like.
• Install the microphone as far as possible from the
cell-phone.
Fix a cable with a commercial item of tape.
Peel the release coated paper of double-face
adhesive tape to fix on the place shown above.
Adjust the direction of the microphone to the driver.
Accessory 6
Installing the Unit
For Volkswagen
1 Attach accessory 3 to the unit.
Accessory 3
• Make sure that the unit is installed securely in
place. If the unit is unstable, it may malfunction
(eg, the sound may skip).
Installation on Toyota,
Nissan or Mitsubishi Car
using Brackets
Car Bracket
Accessory 4 (M5x6mm)
or accessory 5 (M5x7mm)
Accessory 4 (M5x6mm)
or accessory 5 (M5x7mm)
EN_GET0908-001A_MX.indb 82EN_GET0908-001A_MX.indb 82 12/11/13 11:4612/11/13 11:46