Filter
Top Products
Assigning a System Identity
13
The following display appears while the program searches for a Bay
Networks Switch that has not been configured with a Management IP
Address and subnet mask.
Figure 8 − Serial Number Search Display
2. The program automatically enters the Serial Number for the first
Switch discovered into the table of discovered Switches.
Figure 9 − IP Address Configuration Utility Display
3. Assign a Management IP Address and Subnet Mask to the Switch;
the Default Gateway address is optional and can be added later (refer
to Startup Configuration Requirements on page 10 for descriptions of
the required fields).
If you have more than one Switch, click Search to automatically add
the additional Switch serial numbers. To verify the Switches that
have been discovered, you can refer to the serial number on the bar
code on the back of the Switch.