Filter
Top Products
Managing the Switch
22
Logging in and Supplying a Password
Start up a Web browser and enter your Switch's Management IP
Address. Select an option in the navigational menu and submenu, and
then you are prompted for the Login and Password. Enter the system
default Login and Password in lowercase characters, as follows:
Login: admin
Password: setup
IMPORTANT
: If you change your password and later need to access the
Serial Interface Configuration, you must then enter the
modified password. The factory default password is no
longer valid in this case.
Also, make sure you change the default Administrator's
Login and Password as soon as possible (refer to the
Admin→Administrator display. You should then guard the
Login and Password carefully.