Kingston Technology KNE8WG Switch User Manual


 
General Information 3
EtheRx User’s Guide - Rev. B00 Kingston Technology Company
Special Features
8 or 16 UTP ports for 10BASE-T connection
1 BNC port for 10BASE2 thin Ethernet connection
1 AUI port for backbone or mixed media (16-Port models only)
UTP Link, Activity, and Partition Status LEDs
BNC Activity and Partition Status LED
AUI Activity and Partition Status LED (16-Port models only)
Utilization and Collision LEDs displays network traffic and
number of collisions in five LED percentage levels
Cascade Switch on last UTP port (Port 8 or 16) to support crossover or
straight-through cable wiring types
Automatic partition and reconnection
Full preamble, amplitude, and timing regeneration
Conforms to IEEE 802.3 Basic Repeater Functions and 802.3i
Twisted-Pair Transceiver Functions
Apple Mac
OS compatible
External AC Power Transformer included
Stacking Ports (SE hubs only) stacks up to 5 hubs on same network
segment for greater UTP port expansion
Package Contents
EtheRx WG and SE hubs should contain the following items:
ο One EtheRx 10BASE-T Ethernet hub
ο External AC Power Transformer (120VAC or 230VAC)
ο BNC T-Connector
ο (4) Rubber Feet
ο 5.5” Stacking Cable (SE hubs only)
ο User's Guide
If any of the items are missing or damaged, please contact your Kingston
dealer for a replacement. Be sure the items you receive are genuine Kingston
Technology products. If the Kingston name and logo are not on the front panel
of your unit, it’s not a genuine Kingston product.