Filter
Top Products
www.kodak.com/go/aiosupport 11
KODAK ESP 3.2 / 3.2s All-in-One Printers
4. If the name of your network is:
5. If your network has security enabled, use the LCD keyboard to enter your
security string.
6. When the confirmation message appears, touch
OK.
When the printer is successfully connected, the Wi-Fi connectivity LED stops
blinking and remains lit.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, KodakESP3.2+xxxx).
7. If you haven’t installed the KODAK All-in-One Printer Software:
a. Go to www.kodak.com/go/esp3_2downloads (for ESP 3.2 Printers) or
www.kodak.com/go/esp3_2sdownloads (for ESP 3.2s Printers).
b. In the search results, click the link for KODAK All-in-One Printer Software for
your computer operating system.
c. Follow the on-screen instructions.
Listed Not listed
Touch your network
name
.
Make sure your wireless router is turned on and
within range. If your wireless router does not
broadcast its SSID (network name):
1. Touch , then touch Unlisted Network.
2. Use the LCD keyboard to enter your network name,
then touch
OK.
3. Touch WEP or WPA/WPA2 as required for your
network's security setup.
NOTE: If the name of your network is still not listed,
or your want to change your network, touch
, then touch
Rescan for Wireless
Networks
.