Filter
Top Products
8 A-61182 October 2001
Adjusting the trays
There are two trays on the scanner: the ADF tray for loading documents to be scanned
through the automatic document feeder and the output tray which receives scanned
documents from the ADF.
ADF tray
1. Lift the ADF tray to about a 45° angle.
2. Pull the ADF tray wire leg down on top of the clips on the document cover.
3. Press down slightly on the ADF tray to snap the wire leg into the clips.
4. Pull the ADF tray extension wire out to the desired length.
ADF tray
ADF tray
extension wire
Document cover
Wire leg
Clips
ADF tray