Filter
Top Products
Setting Up the Image Source
15
English
Projection options are front, rear and ceiling.
• Front projection is used for projecting straight ahead
onto a screen.
• Rear projection reverses the image if you wish to project
from behind the screen.
• Use ceiling projection when you attach the projector to a
permanent ceiling bracket. (To purchase the optional
ceiling mount kit go to our Web site at
www.kodak.com/go/projectors
.)
H Position and V Position adjustments are available only for images
from a computer.
Adjust Frequency and Tracking of images from a computer until the
image is evenly spaced, fuzzy vertical lines disappear, or the
projected image is as wide as the menu.
Video Format refers to the height and width ratio of the projected
image. The 4:3 ratio is the standard format. Use the 16:9 ratio when
projecting wide screen (anamorph) movies in 16:9 format.
We recommend leaving AGC (Automatic Gain Control) turned on.
When it is turned on, the image is automatically adjusted if the video
signal is too strong or too weak.
V600UserGuide.book Page 15 Tuesday, March 21, 2000 8:26 AM