Filter
Top Products
11
Lamps/Fuse Replacement
Lamps
The VideoMate will function with either of the following 82
volt or 85 watt lamps. One provides a higher color
temperature, with the other exhibits a much longer life.
Do not use 82 volt, 25-300 watt slide projection lamps or
your equipment will suffer severe damage.
pmaLtloVttaW
efiL
)sruoH(
roloC
.pmeT
HSE2858052K0592
*JSE285804K0533
.deilppuspmaldradnatS*
Replacement of the Lamp
The entire illumination system is contained in a unit called
a lamp module. This module is a drawer type configura-
tion which may be removed from the projector for lamp
changing. If anticipated usage of the VideoMate is such
that the downtime associated with changing a lamp would
be detrimental to the goal, a second (spare) VideoMate
lamp may be purchased which will reduce the lapse to a
fraction of a minute. It will also eliminate the accumula-
tion of partially burned lamps with unknown remaining life.
Please call for price and availability.
To replace the lamp:
1. Turn power off and allow the unit to cool down before
handling.
2. Press down on the door latch of the lamp module and
pull slowly outward until the module clears the projec-
tor.
3. Unclasp the wire bail which holds the lamp in place
and push from underneath the lamp to slide the lamp
out of the receptacle.