Filter
Top Products
12
4. Reverse the procedure to insert a new lamp (make
sure the new lamp is properly seated).
5. Lock the new lamp in place with wire bail.
Fuses
Always switch off the projector and unplug the main lead
before replacing a fuse. Avoid the risk of fire, replace only
with a fuse of same type and rating.
Simply pull out the fuse holder, remove the blown fuse and
fit the required replacement.
1. 1 x T2.5 A H/250 V for 220, 230 and 240V
2. 1 x 5A Slownblow/250 V for 100, 115 and 130V
Lamps/Fuse Replacement