Filter
Top Products
• Screw the measuring tape onto
the tripod with the tripod thread
ᕨ.
• Adjust the tripod to the required
height.
• Align the Measuring Tape with
Marking Laser such that the bub-
bles in the spirit levels ᕥ and ᕦ
lie exactly between the markings.
Tilt and incline the tripod to do
this.
• Press the On/Off switch ¸ to
activate the laser.
• Turn the covering flap ᕩ all the
way to the left or right, dependant
on whether you wish to project
a vertical or a horizontal line.
- 11 -
KH3229_UK 04.12.2006 13:36 Uhr Seite 11