Filter
Top Products
• Press the On/Off switch ¸ to
activate the laser.
• Adjust the Measuring Tape with
Marking Laser, with the assistance
of the foot screws ᕧ, such that
the bubbles in the spirit levels ᕥ
and ᕦ lie exactly between the
markings. If you screw out the
foot screw ᕧ a little further, you
can project the laser line somewhat
higher.
• Direct the laser line onto the
desired wall.
• Turn the covering flap ᕩ all the
way to the left or right, dependant
on whether you wish to project
a vertical or a horizontal line.
- 14 -
KH3229_UK 04.12.2006 13:36 Uhr Seite 14