Kompernass KH 4418 Laminator User Manual


 
- 3 -
CO Time
The C.O. Time (Continuous Operation) details how
long an appliance may be used without the motor
overheating and being damaged. After the appliance
has run for this period it must be switched off until
the motor has cooled itself down.
5. Safety instructions
This appliance is not intended for use by individuals
(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used.
Children should be supervised to ensure that they
do not play with the appliance.
• Unplug the power cable after every use and be-
fore cleaning, so as to prevent the appliance from
inadvertently switching itself on.
Check the appliance and all parts for visible
damages. The safety concept can work only if
the appliance is in a faultless condition.
Never perform hot lamination on flammable,
heat-sensitive and/or meltable materials and do
not laminate drawings on temperature-sensitive
paper or material that will undergo changes in
colour or quality when subjected to heat.
Never laminate valuable or unique documents.
Although the laminator satisfies all predominant
safety norms and standards, errors can never be
completely discounted - as with all electrical ap-
pliances. Errors with the laminator can result in
damage to the document being laminated.
• Do NOT laminate any document which, together
with the laminating pouch, would have a thickness
of more than 1,0 mm. Should you do so, the lami-
nating pouch could cant itself inside the laminating
appliance. This would damage the laminating pouch,
the document being laminated as well as the la-
minator.
Do not use an extension cable. Place the appliance
where the mains power socket is easily accessible,
so that in the event of an emergency the plug can
be quickly withdrawn.
Do not use an external timing switch or a separate
remote control system to operate the appliance.
Place the appliance where the power wall socket
is easily accessible, so that in the event of an
emergency the plug can be quickly withdrawn.
ƽ Risk of electrical shock!
Connect the appliance to a mains power socket
with a mains voltage of 220-240 V
~
50 Hz.
Do not take the appliance into use if the power
cable or the plug is damaged.
Arrange for defective power plugs and/or cables
to be replaced at once by qualified technicians
or our Customer Service Department.
NEVER immerse the appliance in water.
Wipe it only with a damp cloth.
Do not expose the appliance to rain and never
use it in a humid or wet environment.
Ensure that the power cable never becomes wet
during operation.
Unplug the appliance immediately after use.
The appliance is free of electricity only when you
remove the plug from the mains power socket.
Do not open the housing or attempt to repair the
appliance yourself. Should you do so, device safety
can no longer be assured and the warranty will
become void.
IB_KH4418_46683_LB6 15.01.2010 12:20 Uhr Seite 3