Filter
Top Products
(8) SMB function
The document data gotten by the scanning function, which is stored temporarily into the HDD1
temporary storage or DRAM temporary storage, is sent to the shared folder of PC that is connected
with the internal network via the HDD2 temporary storage.
(9) Deletion function
The document data in the User BOX, associated with the User BOX identifier, is deleted.
2.6.2. Management Function
The management function can be permitted to use by the administrator, only after the successful
identification and authentication. This function can be used from the operation panel only. The
administrator conducts the setting for the network information of TOE and the operational setting for
the TOE function through this management function. Moreover the management function controls
the related information for the operation of digital MFP, such as the creation/attribution change/
deletion of User BOX, the printing of audit information, the initialization process of HDD1 and
HDD2 (initialization of data, password setting to prevent the unauthorized readout of data), the
management of troubleshooting/toner/number of prints.
2.6.3. CE Function
The CE function can be permitted to use the following functions by the CE, only after the
successful identification and authentication
- Service setting mode
The CE executes the registration and change of the administrator password by using the
function of service setting mode from the operation panel.
- CSRC (CS Remote Care)
The CE gets the information for the hardware maintenance such as the number of prints,
jam frequency, and out of toner, by accessing bizhub PRO 920 series from the computer
connected through the public line network or the Internet. CSRC is executed with RS232C
interface or Email interface. The RS232C interface, that is to say transmission rule with
modem, here uses an original communication protocol. Email uses also an original
message communication protocol, and this CSRC does not have the interface to the
document data.
2.7. Asset to be protected
The asset to be protected by the TOE is the document.
Copyright© 2005 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved