Konica Minolta C300 Printer User Manual


 
Created by Hotline Support
Konica Minolta Hotline Support (UK)
24
Configuration 2
Figure 1: A network cable must be plugged into the main body LAN port
Figure 2: A network cable must be plugged into the LAN port on the Fiery
The machine now has two IP addresses. One for the Fiery, one for the main body.
When browsing the web interface, you need to use the correct IP address for what
you want to browse.
All scanning is handled by the main body only.
Please refer to pages 16 - 21.
--When connecting via supplied crossover cable--
If the Fiery is assigned an IP from the LAN, which has addresses above then the Fiery
will assign the Copier Engine with an IP above the one it has been given from the LAN,
This is a Psudo address and will not affect the LAN side of the Fiery.
eg: Fiery=192.168.0.100, Copier Engine=192.168.0.101.
(It is still advisable not to use two IP addresses either side of the one allocated to the
Fiery)
From the Copier main Body it will show an IP in the 172.?.?.? range which will be the
Copiers’ true IP address as given by the DHCP function of the Fiery.
ALL
of the Emperon functions are available via the Psudo IP address
Fi
g
ure 1
Fi
g
ure 2