Konica Minolta F-2900 Scanner User Manual


 
72
SCAN SETTINGS
4. Enter the desired output resolution from the
output resolution drop-down list.
Values can also be entered into the output resolution list box directly.
The output resolution cannot be changed when the unit list box is set
to pixels.
5. The dimensions of the cropping frame are
displayed in the input size text boxes.
Values can be entered directly or by resizing the cropping frame.
The values will change if a different unit of measure is selected.
The scanning area size can't be changed if the Input Size is locked.
6. Enter the desired output size (maximum 3 digits).
The output size is limited by the maximum resolution of the scanner.
The values will change if a different unit of measure is selected.
The output size cannot be changed when the unit list box is set to
pixels.
The scanning area size can be changed proportionally (within the
resolution limits) when the Output Size is locked.
7. The input scan resolution text box is set to the
lowest input (scan) resolution necessary to
achieve the desired output size and resolution.
Input scan resolutions can also be selected from the drop down list
or entered directly.
Click on to lock the settings.
The icon will change to .
Click again to unlock.
The magnification text box
displays the output/input size
ratio as a percentage.
Magnification values can be
entered directly.