Filter
Top Products
Configuring printer driver settings
5
IC-205 5-25
Configuring printer driver settings Chapter 5
Scaling
Specify the zoom ratio for enlarging or reducing the print image.
Type or select a value between 20 % and 400 %.
2
Note
The
Scaling
setting is not available while the
Fit to Paper
check box is
selected.
5.4.3 Copies
Use this setting to specify the number of copies to be printed.
Type or select a value between 1 and 99.
5.4.4 Collate
Use this setting when printing multiple copies of the same document, to
specify whether each copy of the document should be printed individually or
if all copies of each page should be printed as a set.
Selecting On prints each copy of the document separately. If you have “5”
specified for Copies, for example, this setting would print the document from
the first page to the last page five times.
Selecting Off prints all copies of each page as a set. If you have “5” specified
for Copies, for example, this setting would print five copies of page one, fol-
lowed by five copies of page two, etc.
2
Note
The
Collate
setting may not be available with some applications.
Collating is not available when “1” is specified in the copies box.
If
Collate
is set to “On” in the printer driver, be sure to disable the appli-
cation’s collate function.
5.4.5 Orientation
Use this setting to specify whether your document should be printed in Por-
trait (vertical) or Landscape (horizontal) format.
Rotate
Select the Rotated check box to rotate the print image 180° to the paper ori-
entation.