Filter
Top Products
User Authentication in Enhanced Security Mode
4
bizhub PRO 920 9
!
Detail
When a user accesses a Box for which a password has been set in the
HDD, all authentication operations with password will be saved in an au-
dit log.
!
Detail
Initially, the user authentication is not available on the machine. To acti-
vate this function, the distribution number for each section should be
changed. For details, see the User's guide of POD Administrator's Refer-
ence.
4.2 To register a new user
Follow the procedure below to setup a new user name and password to be
required for user authentication in Enhanced Security mode.
!
Detail
Passwords are case sensitive.
If a wrong password or fewer than 8 alphanumerical characters are en-
tered and the [OK] is touched, the warning message “Password does not
match” will appear, and no key will work for five seconds. Enter the right
password after five seconds.
If authentication fails, the information will be saved in the audit log.
Procedure
1 Press [Utility/Counter] on the
control panel.
The Utility Screen will be dis-
played.