Kramer Electronics VP-721DS Webcam User Manual


 
Kramer Electronics Ltd.
13
EXCLUSION OF DAMAGES
Kramer’s liability for any defective products is limited to the repair or replacement of the product at our option.
Kramer shall not be liable for:
1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of
use of the product, loss of time, commercial loss; or:
2. Any other damages, whether incidental, consequential or otherwise. Some countries may not allow
limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from place to
place.
Note - All products returned to Kramer for service must have prior approval. This may be obtained from your
dealer.
14 COMPLIANCE NOTICE
This equipment has been tested to determine compliance with the requirements of:
EN 55022
CE emissions standards, Class B
EN-50081
Generic Immunity standard for residential, commercial and light industrial)
CFR-47
FCC Rules and Regulations:
Part 15- Radio frequency devices:
Subpart B - Unintentional radiators
CAUTION!
Servicing the Video Scaler can only be done by an authorized Kramer technician. Any user who makes
changes or modifications to the unit without the expressed approval of the manufacturer will void user
authority to operate the equipment.
Please use recommended interconnect cables to connect the machine to other components.
When used, it is assumed that the unit is grounded by normal means (e.g. via the computer video input
cable, rack-mount chassis ground, or video output cable to display device). Use of the equipment without
any form of grounding may affect radiated emissions, but will not affect the product's safety.