Kreisen LT-30FMP Computer Monitor User Manual


 
ENGLISH
25
External Equipment Connection
You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Examples are shown below.
VCR
ANT.
A/V INPUT
1. Connect the AV out jacks on of the VCR to A/V-
In jacks on the TV.
2. Press the TV/AV button to select VIDEO mode.
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the
screen.
Note : If you have a mono VCR, connect the audio
cable from the VCR to the L(MONO) socket of the
set.
COMPONENT INPUT
1. Connect the COMPONENT video output sockets
(Y Cb Cr) of the COMPONENT to the
COMPONENT INPUT sockets of the set.
2. Connect the audio cable from the COMPONENT
to the COMPONENT INPUT sockets of the set.
3. Press the TV/AV button to select COMPONENT
mode.
4. Press the PLAY button on the DVD.
The COMPONENT playback picture appears on
the screen.
Antenna connection.
1. Connect RF out on the VCR to the Antenna input
on the rear of the TV
2. Connect the antenna cable to the antenna in
jack on the VCR.
3.
Use the TV/AV button to select TV mode.
4. Press the PLAY button on the VCR.