Filter
Top Products
2.4 Cascading Multiple Hubs
More than one hub can be cascaded together to be a hub stack using the
cascade cable supplied with the hub. Two cascade connectors are lo-
cated on the rear of the hub and labeled IN and OUT respectively for
KF-16M. For KF-16MS, only IN cascade connector is provided.
Before cascading hubs, make sure the power to the hubs is turned off.
Connect one end of the cascade cable to the IN connector of the first
hub and connect the other end to the OUT connector of the second hub
as shown in the following figure:
Figure 2-5 Cascading Two Hubs
10