Filter
Top Products
Connecting to a Computer
The RJ-45 connectors labeled 1X to 16X can be used for connecting to
the network adapter installed in a computer. The network adapter can be
a 10BASE-T adapter, a 100BASE-TX adapter, or a dual-speed NWay
adapter. The following figure illustrates the cables used for connecting
to different network adapters:
Figure 3-3 Connecting to Computers
Connecting to 10BASE-T Hubs
The hub can support more than one connection to the 10BASE-T hub.
Make sure the MDI-X to MDI-I connection rule is followed when con-
necting to a 10BASE-T hub using a straight-through UTP cable. The
following figure shows an example for the connections:
Figure 3-4 Connecting to 10BASE-T Hubs
14