Filter
Top Products
-14-
2.6 Applying Power
The switch provides two types of power interfaces, terminal block and DC power jack for receiving DC
power input from external power supply system.
Using Terminal Blocks
Three terminal contacts are provided:
Vdc Positive (
+) terminal
Vdc Negative (
-) terminal
Chassis ground
( Vdc : +5V ~ +30VDC)
One 3P terminal plugs are provided together with the switch. The plug is shown below:
Power wires : 24 ~ 12AWG (IEC 0.5~2.5mm
2
)
Install the power source wires with the plug properly. Then, plug in the terminal block socket.