Filter
Top Products
-49-
4.11 Reboot System
This menu is used to reboot the switch unit remotely with current configuration. Starting this menu will
make your current http connection lost. You must rebuild the connection to perform any management
operation to the unit.
4.12 Restore Default
This menu is used to restore all settings of the switch unit with factory default values. Note that this
menu might change the current IP address of the switch and make your current http connection lost.
4.13 Update Firmware / Configuration
This web page can be used to:
Upload new version of firmware from PC to the device
Upload (Restore) new configuration file from PC to the device
Backup switch configuration and save as a file on PC
4.13.1 Update Firmware
This menu is used to perform in-band firmware (switch software) upgrade. Enter the path and file name
of new firmware image file for uploading.
Configuration Description
Filename Path and filename (warp format)
[Browse] Click to browse your computer file system for the firmware image file
[Upload] Click to start upload