Filter
Top Products
-26-
Click [Port PVID Setting]
This page is used to setup PVID and Tag mode for each port as follows:
PVID : The setting value is used for VLAN group lookup index. When a
packet is received, the least four bits (bit 3~bit 0) of the PVID setting of
the input port is used as the index mapping to one VLAN group. The
mapped group is used for packet forwarding operation. The valid value
range is 1 ~ 4095.
Refer to section 2.4 for more information about the MNG port.
Tag Mode : Tag mode setting of each port is preset to Untag mode auto-
matically and they are not changeable under Port-based VLAN mode.