Filter
Top Products
-27-
3.4.2 802.1Q VLAN
Click [VLAN Mapping Table]
This page is used to setup member ports for each VLAN group. Total of
16 VLAN groups are supported. Actually, the table are shared by Port-
based VLAN mode and 802.1Q VLAN mode.
The steps to configure the member ports are:
1. Select Group number : 0 ~ 15.
2. Set [Ye s] on the selected port to include it into the member port list.
802.1Q VLAN group mapping is dependent on the received packet type:
Untagged packet - Use the least four bits of PVID value of the input port
Tagged packet - Use the least four bits of the VID value of the packet