Filter
Top Products
label. If you are not sure of the type of power source required, consult your service provider or
local power company.
2.3 DIN-Rail Mounting
In the product package, a DIN-rail bracket is installed on the device for mounting the device in a
industrial DIN-rail enclosure.
The steps to mount the device onto a DIN rail are:
1. Install the mounting bracket onto the device unit as shown below:
2. Attach bracket to the lower edge of the DIN rail and push the unit upward a little bit until the
bracket can clamp on the upper edge of the DIN rail.
3. Clamp the unit to the DIN rail and make sure it is mounted securely.
4. Make sure that there are proper heat dissipation from and adequate ventilation around the device.
11/20