Filter
Top Products
Copy Functions 1-19
Booklet from Sheets
Delivers booklet of two-sided copies with facing pages from one-sided or
two-sided originals. Booklets such as magazines can be created by
folding at the center. Also, thick paper or colored paper may be inserted
as a cover page.
Paper for the cover page is fed from the MP tray. To supply cover paper
from a cassette, refer to Specifying Paper Source for Cover on page 3-6.
For binding on the left side
The folded copies can be read from left to right.
For binding on the right side
The folded copies can be read from right to left.
For top binding
The folded copies can be read from top to bottom.
Follow the steps as below for these booklet types.
1 Press [Function].
2 Press [Booklet].
3 Press [Booklet].
4 Select binding orientation for Original and Finishing.
If the message Cannot copy with these settings. Modify settings
according to the original and finishing is displayed, verify that you
are selecting the correct original orientation (shown at the right of the
touch panel) and the correct settings for the original and finished
copies.
Note Paper sizes available for booklet (sheet original) are limited
to 11 × 17", 8 1/2 × 14", 11 × 8 1/2", 8 1/2 × 11", A3, B4, A4, A4R,
B5 and B5R.
Original Copy
Original Copy
Original Copy
Ba
Sel
e
Off
Booklet
1 sided
Shortcut
Ori
e
Original
J
Book
Left/Right
2-sided
Top/Bottom
2-sided
Finishing Stitching
Off
Stitching
Booklet
2 sided mode.
Binding
Binding
Binding
Booklet
Right
Top
Left
Front cvr
T
o
T
o