Kyocera FS-8000C Printer User Manual


 
7
KPDL Error ##
Press GO
KPDL (PostScript) error has occurred.
Press the GO key to resume printing. Or,
you can abandon printing by the CANCEL
key.
Load Cassette #
(paper size)/(paper
type)
The paper cassette (indicated by #)
matching the paper size and paper type of
the current job is empty. Load paper into
the paper cassette. Press the GO key to
resume printing.
Load MP tray
(paper size)/(paper
type)
There is no paper cassette installed in the
printer that matches the paper size and
paper type of the current job. Set alterna-
tive paper in the MP tray. Press the GO
key to resume printing.
Memory card err
Insert again
The memory card is accidentally removed
from the memory card slot during reading.
If you continue reading the memory card,
insert the same memory card into the slot
again. The printer again reads it from the
beginning of the data. Also see Insert
the same memory card on page 6.
MemoryCard err##
Press GO
A memory card error has occurred. Press
the GO key to resume.
Memory overflow
Press GO
The total amount of data received by the
printer exceeds the printer memory. Try
adding more memory. Press the GO key
to resume printing.
Missing
duplex unit
You have attempted to duplex-print while
the duplexer is not installed. Install the
duplex unit.
Missing
stapler unit
The stapler unit is not installed in the
option document finisher. Install the
stapler unit.
Message Corrective Action
FS8000QR.book Page 7 Tuesday, December 25, 2001 10:47 AM