Filter
Top Products
Troubleshooting
4-16 OPERATION GUIDE
Rear Unit
1
If paper is not completely ejected
into the output tray, open the rear
unit.
2
Open the fuser cover and remove
the jammed paper by pulling it out.
NOTE: If you cannot find a
paper jam, try checking inside
the rear of the printer.
CAUTION: The fuser unit inside the printer is hot. Do not touch it with your
hands as it may result in burn injury.
3
Close the rear unit. The printer
warms up and resumes
printing.out.
Paper Feeder
Paper is jammed at optional paper cassette 2 (to 4). Refer to the
Installation Guide for the optional paper feeder and remove the jammed
paper.
Envelope Feeder
Paper is jammed at the optional envelope feeder. Remove the jammed
paper using the same procedure as for a jam at the MP Tray. Then, open
and close the paper transfer unit. For details, refer to the User’s Manual for
the envelope feeder.
Bulk Paper Feeder
Paper is jammed at the optional bulk paper feeder. Detach the bulk paper
feeder from the printer by sliding with the rail away from the printer, holding
the bulk paper feeder by both hands. If paper is partially fed out from the
feeder's output slot, pull the paper out by hand.