Filter
Top Products
3.6 Making Default Settings
3-43
3.6.2 KC-GL Pen Width and Color
The KC-GL emulation mode enables you to set the pen widths in dots, individual pen colors
for pen numbers 1 to 8, and the KC-GL page size.
1
11
1
Press the MENU key.
2
22
2
Press the U or V key repeatedly until Emulation appears on the message display.
3
33
3
If the current emulation is other than KC-GL, press the ENTER key. A blinking
question mark (?) appears.
4
44
4
Press the U or V key repeatedly until KC-GL appears. Press the ENTER key.
5
55
5
Press the Z key to move to the >KC-GL Pen Adjust> submenu. To change the
pen width and/or pen color, press the ENTER key. A blinking question mark (?)
appears.
6
66
6
Press the U or V key repeatedly until the desired pen number of 1 to 8 appears.
When the desired pen number is displayed, press the ENTER key.
7
77
7
To change the pen width, press the Z key, then press the ENTER key. A blinking
cursor appears at the width value.
8
88
8
Press the U or V key repeatedly until the desired pen width in dots (00 to 99)
appears. When the desired pen width is displayed, press the ENTER key.
9
99
9
To set the pen color, press the U or V key. To change the pen color, press the
ENTER key. A blinking question mark (?) appears.
10
1010
10
Press the U or V key repeatedly until the desired pen color (Black, Red, Green,
Yellow, Blue, Magenta, Cyan, White) appears. When the desired pen color is
displayed, press the ENTER key.
11
1111
11
To set the KC-GL page size, press the Y key twice, then Press the U or V key until
>KC-GL Page Set is displayed.
Emulation >
KC-GL
>KC-GL Pen
Adjust ? Pen (1)
>>Pen(1) Width
02
dot(s)
>>Pen(1) Color
? Black