Filter
Top Products
3.6 Making Default Settings
3-44
12
1212
12
To change the page size, press the ENTER key. A blinking question mark (?)
appears.
13
1313
13
Press the U or V key repeatedly until the desired page size (A2, A1, A0, B3, B2,
B1, B0, and SPSZ) appears. The SPSZ command sets the paper edge limits to the
dimensions of a standard paper size. See this command explained in the
Programming Manual in the CD-ROM. Press the ENTER key to set the page set you
just selected.
14
1414
14
Press the MENU key. The display returns to Ready.
3.6.3 Alternative Emulation for KPDL Emulation
The auto KPDL [KPDL (AUTO)] emulation enables the printer to automatically change
the emulation mode according to the print job received. The emulation mode the printer
switches alternatively can be selected using the operator panel. The default alternative
emulation is HP PCL 6.
1
11
1
Press the MENU key.
2
22
2
Press the U or V key repeatedly until Emulation > appears.
3
33
3
Press the ENTER key. A blinking question mark (?) appears.
4
44
4
Press the U or V key repeatedly until KPDL (AUTO) appears. Press the ENTER
key.
5
55
5
Press the Z key. Press the U or V key until >Alt. Emulation is displayed. The
alternative emulation currently selected also appears — PCL 6 or KC-GL.
6
66
6
To change the alternative emulation, press the ENTER key. A blinking question
mark (?) appears.
>KC-GL Page Set
? [A2]
Emulation >
PCL 6
Emulation
?PCL 6
Emulation
?KPDL (AUTO)
>Alt. Emulation
?PCL 6