Filter
Top Products
Preparation
2-16 BASIC OPERATION GUIDE
Setting the Date and Time
Use these instructions to register the current date and time, the time
difference from Greenwich Mean Time (GMT), and the summer time
setting.
1
Press [System Menu / Counter].
2
Press S or T to select Machine
default and press [Enter].
3
Use the keypad to enter the 4 digit
management code.
NOTE: The factory default management code varies for each model:
16 ppm model = 1600, 20 ppm model = 2000, and 25 ppm model = 2500.
The four-digit management code can be changed. For details refer to
Chapter 3, Advanced Operation Guide.
If the code is accepted, the
Machine default screen displays.
4
Press S or T to select Date/Time
and press [Enter].
5
Press S or T to select Time
Zone.
Press < or > key to set the time
difference from Greenwich Mean
Time.
Job Accounting
System Menu / Counter:
Copy Default
Machine Default
Enter Pin Code using # key.
End
Auto Cassette SW
Machine Default:
Paper Size(1st)
On
Auto I
:
:
Date/Time
Key Sound On/Off On:
Machine Default:
Low Power Time :15Min.
06:33:
Time Zone
06:33
Off
GMT
:
:
:
Time
Date/Time:
DST
00:00+