Kyocera KM-2550 All in One Printer User Manual


 
Basic Operation
BASIC OPERATION GUIDE 3-15
Interrupt Mode
Interrupt Mode can be used to
stop copying or printing
temporarily to run a more urgent
job.
After the urgent job is complete,
the interrupted job can be
resumed.
The following Interrupt Modes are available:
Interrupting Copying
1
Press [Interrupt].
An Interrupt mode OK message
displays.
2
Remove and store the original for the current copying job.
Mode Description
Interrupt Copy This mode can be used to interrupt a copy job which is
currently scanning to make copies of a different original
using different settings. After the interrupt job
completes, the previous job settings return and the
interrupted job is resumed.
This mode can also be used to interrupt copy output to
make a copy of another job. After the interrupt copy
has been produced, the interrupted job is resumed.
Priority Output This mode can be used to interrupt output of a job to print
an urgent print or received fax job. After the urgent job
completes, the interrupted job is resumed.
NOTE: To use the fax functions, the optional Fax Kit must
be installed.