Filter
Top Products
9
Full Moon occurs when the earth, moon, and sun are in approximate alignment, with the moon and the
sun on opposite sides of the earth. The illuminated portion of the moon faces the earth, giving us
complete visibility of one side of the entire moon. After a full moon the illuminated portion will decrease or
wane until the new moon occurs.
First Quarter and Last Quarter moons occur when the moon is at a 90 degree angle to the earth and
sun. So we see half of the moon illuminated and half is in shadow.
Waxing means growing or expanding illumination and happens after a new moon.
Waning means decreasing illumination and occurs after a full moon.
Crescent refers to the moon being less than half illuminated. Crescents can be waning or waxing.
Gibbous describes a moon phase when more than half is illuminated. Gibbous can be waxing or waning.
Note: With the moon shown against a light colored background, the phases will show opposite to a paper
calendar. The segments that are highlighted will portray the part of the moon that is lit. For instance, the
moon will be blank during a new moon and dark during a full moon.
Position the Atomic Projection Clock
1. The Atomic Projection Alarm has a wide base to sit on a desk or table.
2. Choose a location 6 feet or more from electronics such as cordless phones, gaming systems,
televisions, microwaves, routers etc.
3. For best WWVB reception orientate the Atomic Projection Alarm with the front of the back facing Ft.
Collins Atomicado.
Care and Maintenance
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
Do not expose the Atomic Projection Alarm to extreme temperatures, vibration or shock.
Keep Atomic Projection Alarm dry.
Clean the Atomic Projection Alarm with a soft damp cloth. Do not use solvents or scouring agents.
The Atomic Projection Alarm is not a toy. Keep it out of reach of children.
The Atomic Projection Alarm is not to be used for medical purpose or for public information, but is
determined for home use only.
The specifications of this Atomic Projection Alarm may change without prior notice.
Improper use or unauthorized opening of housing will void the warranty.
If the unit does not work properly, change the batteries and/or check the a/c cord connection.
Specifications
Indoor:
Temperature Range: +32°F to +122°F (0°C to 50°C)
Accuracy: +/- 2 degrees Fahrenheit
Interval: About every 30 seconds
Power:
Atomic Projection Alarm: 5-volt a/c power adapter (included)
Optional 2-AAA, IEC, LR3 batteries (not included)
USB: Output 0.5 Amp maximum. Do not overload USB port.
Battery Life:
Atomic Projection Alarm
Battery Backup: Battery life is over 24 months when using the AC adapter for primary
power
DIMENSIONS:
Atomic Projection Alarm: 5.23” W x 4.33” H x 1.96” D (133 x 110 x 50mm)