Filter
Top Products
6
indoor humidity/ indoor temperature/ month & date/ weekday/ seconds.
(Seconds replace outdoor temperature).
3. Press the + button a third time and the display will now show:
indoor humidity/ indoor temperature/ month & date/ seconds/ outdoor temperature
(Seconds replace weekday).
4. Press the + button a fourth time and the display will return to the default time display.
Alarm Set
To enter into the alarm setting mode:
1. Hold the ALM button for 4 seconds. The hour digits start flashing.
2. Press and release the + button to set the hour.
3. Press and release the ALM button to set the minutes. The minute digits start flashing.
4. Press and release the + button to set the minutes.
5. Press and release again the ALM button to exit the Alarm setting mode or wait for 15 seconds automatic timeout.
Deactivate Alarm
The alarm will be automatically ON when the alarm time is set. The alarm icon is visible after the minutes. To
deactivate the alarm (OFF), press and release once the ALM button in normal mode display. The alarm icon will
disappear, the alarm is now off.
Snooze
When the alarm sounds press the SNZ button on the back of the clock to activate the snooze feature for 10 minutes..
Moon Phase
The Moon Phase will show according to the calendar setting. There are total twelve Moon Phases that will display on
LCD.
Note: With the moon shown against a light colored background, the phases will show opposite to a paper calendar. The
segments that are highlighted portray the part of the moon that is lit. For instance, the moon will be blank during a new
moon and dark during a full moon.
• Waxing means growing or expanding illumination which occurs after a new moon.
• Waning means decreasing illumination and occurs after a full moon.
• Crescent refers to the moon being less than half illuminated. Crescents can be waning or waxing.