Filter
Top Products
9
TIME RECEPTION SETTING (ON/OFF)
In area where reception of the WWVB time is not possible, the WWVB time reception function
can be turn OFF. The clock will then work as a normal Quartz clock. (Default setting is ON).
1. The ON digit will start flashing on LCD1. Set the RCC ON or OFF by pressing the + key.
2. Press and release the SET key to enter the “Language Setting“.
Note:
If the Time Reception function is turned OFF manually, the clock will not attempt any
reception of the WWVB time as long as the Time Reception OFF function is activated.
The Time Reception icon will not be displayed on the LCD.
LANGUAGE SETTING
The weekdays can be displayed in LCD2 with the pre-set languages: US English, French,
Spanish and German.
1. Set the desired language for the weekday display in LCD 2 by use of the + key.
2. Press and release the SET key to enter the mode “12/24 Time Display Setting”.
12/24 HOURS TIME DISPLAY SETTING
1. The “12h” or “24h” will start flashing in LCD2 (Default setting 12h). Select the desired
time display mode by use of the + key.
2. Press and release the SET key to enter the “ºC/ºF Temperature Setting“.
°C OR °F TEMPERATURE SETTING
1. The characters “°F” or “°C” will start flashing on LCD2 (Default setting °F). By use of the
+ key select “°C” for temperature display in degrees Celsius or “°F” for degrees
Fahrenheit.
2. Press and release the SET key to enter the “ºManual Time Setting”.
MANUAL TIME SETTING
In case the radio-controlled clock is not able to detect the WWVB-signal (disturbances,
transmitting distance, etc.), the time can be manually set. The clock will then work as a normal
Quartz clock.
Note: In 12-hour mode the time will be displayed with an additional “PM” for the time from
12:00 noon until 11:59.
1. The hour digits will start flashing on LCD1.