La Crosse Technology WT-8029U Clock User Manual


 
7
If the tower icon flashes, but does not set the time or the
WWVB tower does not appear at all, then please take note of
the following:
Recommended distance to any interfering sources like
computer monitors or TV sets is a minimum of 6 feet (2
meters).
Within ferro-concrete rooms (basements,
superstructures), the received signal is naturally
weakened. In extreme cases, please place the unit close
to a window and/ or point its front or back towards the
Fort Collins, Colorado, transmitter.
During nighttime, the atmospheric disturbances are
usually less severe and reception is possible in most
cases. A single daily reception is adequate to keep the
accuracy deviation below 1 second.
Note: In case the solar atomic clock is not able to detect the
WWVB-signal (disturbances, transmitting distance, etc.), the
time can be manually set (please refer to notes on Manual time
setting).
FUNCTION KEYS
The radio-controlled clock has four easy to use keys:
SET key : To enter into the set mode for the following
functions: time zone, DST ON/OFF (daylight
saving time), language, hour, minute, year,
month, date, weekday, 12/24h time format
display, ºF/ ºC temperature unit, and solar mode
+ key : To change any values in manual set mode
ALM key : To enter into the alarm set mode
To activate/deactivate the alarm
SNZ key : To activate the snooze function during alarm
To exit manual setting modes
LCD SCREEN DESCRIPTIONS
The radio-controlled clock's LCD is divided into 2 sections and
once the batteries are inserted, all the segments will light up
8
Weekday
Indoo
r
temperature
Low batter
y
icon (clock)
briefly before displaying the information for time, date, indoor
temperature and indoor humidity.
MANUAL SETTINGS
Note: If the radio-controlled clock has already
successfully received the WWVB time signal and displays
the correct time and date, then the Manual settings can be
skipped.
After completion of the above described procedures in
Setting-up” the manual setting modes can be entered by
pressing the SET key. The following settings can now be
programmed:
Time zone setting
DST ON/OFF
Language display setting
Manual time setting
Year setting
Month setting
Date setting
Weekday setting
12/24h time format display
ºF/ºC temperature setting
Solar mode setting
Date
Indoor
humidity
display
WWVB
time
Radio reception icon
A
larm icon