Filter
Top Products
11
MONTH
1. The month digit on LCD2 will start flashing (Default
setting 1). Set the desired month by use of the + key.
2. Press and release the SET key to move to the mode
“Date Setting”.
DATE
1. The digits for the date will start flashing on LCD2 (Default
setting 1). Set the desired date by use of the + key.
Note: The date can only be set in conjunction with the
selected month. For example, it is not possible to set the
date 30 if the month of February is selected.
2. Press and release the SET key to move to “Weekday
setting”.
WEEKDAY
1. The weekday symbols will be displayed on LCD2 in the
pre-set language and flashing. Set the desired weekday
by use of the + key.
2. Press and release the SET key to enter the mode
“12/24h Time Format Setting”.
12/24H TIME FORMAT
The time format can be display in 12h or 24h (Default setting
“12h”).
1. The digits “12” or “24” will start flashing on LCD1. By
use of the + key select 12h or 24h time format display.
2. Press and release the SET key to enter the mode ҼC or
ºF Temperature Setting”.
°C OR °F TEMPERATURE
The temperature setting can be set to either to ºF or ºC (Default
setting °F).
1. The characters “°F” or “°C” will start flashing on LCD1.
By use of the + key select “°F” for temperature display in
degrees Celsius or “°C” for degrees Fahrenheit.
2. Press and release the SET key to enter the mode “Solar
Mode Setting”.
12
SOLAR MODE
The Solar Mode is used for saving the power consumption of
the rechargeable battery (Default setting ON):
1. The characters “ON” or “OFF” will start flashing on
LCD1. By use of the + key select “ON” or “OFF” to set
the solar mode.
2. Press and release the SET key to exit the setting mode
and switch back to the normal display mode.
If the solar mode setting is ON:
LCD will automatically turn OFF automatically if the
environment is too dark
LCD will automatically turn ON automatically if the
environment is bright enough; the surrounding
environment brightness is checked every 5 seconds
No information will be displayed when the LCD is
OFF, but all the settings and operations will remain,
except for the temperature and humidity
measurements.
If the solar mode setting is OFF:
LCD will remain ON constantly.
EXIT THE MANUAL SETTING MODES
To return to the normal display mode from anywhere in
manual setting mode simply press the SNZ key anytime.
If no keys are pressed for at least 15 seconds in setting
mode, the radio-controlled solar clock will automatically
switch back to normal display mode.
ALARM
To enter into the alarm setting mode:
1. Hold the ALM key for 4 seconds. The hour digits start
flashing.
2. Press and release the + key to set the hour.
3. Press and release the ALM key to set the minutes. The
minute digits start flashing.
4. Press and release the + key to set the minutes.