Filter
Top Products
7. Replace the casing by aligning the rear ports
with their respective slots, and then gently press
down on the front until you hear an audible
“click”, indicating closure.
NOTE: LaCie does not recommend removing the two bands on the face of the drive. In such an
event, please take great care when separating the top shell from the bottom plate. Should the
need arise, you may gently pull back the plastic face exactly where it joins to the bottom plate in
the front; then, gently pry the top away. LaCie is not responsible for any damage or loss of drive
performance caused by separating the top and bottom of the box in such a manner.
II) Connect the drive to your computer.
1. Plug the power supply into an electrical outlet and connect the power cable to the hard
disk enclosure.
2. Connect the USB interface cable from the box to your computer.
3. Turn on the drive by moving the power switch on the back to the ON position. After a few
seconds, the volume will mount on your computer and appear in My Computer (Windows
users) or on your desktop (Mac users).