Lanier 5613 All in One Printer User Manual


 
Copying from the Bypass Tray
27
2
Copying from the Bypass Tray
Use the bypass tray to copy onto OHP
transparencies, adhesive labels, trans-
lucent paper, postcards, envelopes,
and copy paper that cannot be set in
the paper tray.
Note
If you do not use standard size
copy paper, you should enter ver-
tical and horizontal dimensions.
The sizes that you can enter are as
follows:
Reference
For details about paper capacity in
the bypass tray, see p.12 Copy Pa-
per.
A
AA
A
Open the bypass tray.
B
BB
B
Push up the paper guide release
lever.
1.
Paper guide release lever
C
CC
C
Gently insert the copy paper face
down and adjust the paper
guides.
1.
Horizontal size
2.
Vertical size
3.
Extender
4.
Paper guides
Important
If the guides are not flush with
the copy paper, a skew image or
paper misfeeds might occur.
Metric version Vertical:
90 216mm
Horizontal:
140 356 mm
Inch version Vertical: 3.5" 8.5"
Horizontal: 5.5" 14"
StellaC-EN-CopyF_V4_FM.book Page 27 Wednesday, July 4, 2001 11:23 AM