Lanier 5613 All in One Printer User Manual


 
Other Functions
31
2
Other Functions
User Codes
When user codes are set, operators
must enter their user codes before the
machine can be operated. The ma-
chine keeps count of the number of
copies made under each user code.
Note
When user codes are set, the ma-
chine will prompt you for your
user code after the power switch is
turned on or Copy Reset Timer
comes into effect.
To prevent others from making
copies using your user code, press
the {
{{
{Clear Modes}
}}
} and {
{{
{Clear/Stop}
}}
}
keys simultaneously after copying.
Reference
For details about user codes, see
p.56 Settings You Can Change
with the User Tools.
Setting the User Code
A
AA
A
Press the {
{{
{User Tools/Counter}
}}
} key.
B
BB
B
Press the 0
00
0 or 1
11
1 key to display
3. Copier Features, and then
press the {
{{
{OK}
}}
} key.
C
CC
C
Press the 0
00
0 or 1
11
1 key until 7.
Key Op. Tools is displayed, and
then press the {
{{
{OK}
}}
} key.
D
DD
D
Press the 0
00
0 or 1
11
1 key until 7.
Program User Code is displayed,
and then press the {
{{
{OK}
}}
} key.
E
EE
E
Enter the desired user code with
the number keys, and then press
the {
{{
{OK}
}}
} key.
Auto Start
If you press the {
{{
{Start}
}}
} key during the
warm-up period, the {
{{
{Start}
}}
} key will
blink and your copies will be made as
soon as warm-up finishes.
A
AA
A
Make any adjustments to copy set-
tings during the warm-up period.
B
BB
B
Place your originals.
C
CC
C
Press the {
{{
{Start}
}}
} key.
The {
{{
{Start}
}}
} key indicator flashes
green.
Note
To cancel Auto Start, press the
{
{{
{Clear/Stop}
}}
} key.
StellaC-EN-CopyF_V4_FM.book Page 31 Wednesday, July 4, 2001 11:23 AM