Lantronix EDS-MD4 Server User Manual


 
11: Maintenance and Diagnostics Settings
EDS-MD User Guide 74
System Settings
The EDS-MD4/8/16 System settings allow for rebooting the device, restoring factory defaults,
uploading new firmware and updating a system’s short and long name.
Note: Anytime you reboot the unit, this operation will take some time to complete.
Please wait a minimum of 5 seconds after rebooting the unit before attempting to make
any subsequent connections.
Table 11-12 System Settings
To Reboot or Restore Factory Defaults
Using Web Manager
To access the area with options to reboot, restore to factory defaults, upload new firmware,
update the system name (long or short names) or to view the current configuration, click
System in the menu.
Using the CLI
To enter the command level: enable
Using XML
Include in your file: <configgroup name=”xml import control”>
System Settings Description
Reboot Device
Reboots the device.
Restore Factory Defaults
Restores the device to the original factory settings. All configuration will be
lost. The EDS-MD automatically reboots upon setting back to the defaults.
Upload New Firmware
FTP to the EDS-MD. Write the new firmware file to firmware.rom on the
EDS-MD. The device automatically reboots upon the installation of new
firmware. See the section, FTP Settings on page 53.
Short Name Enter a short name for the system name. A maximum of 32 characters are
allowed.
Long Name Enter a long name for the system name. A maximum of 64 characters are
allowed.