Filter
Top Products
Troubleshooting
B - 4
B.4 DHCP Troubleshooting
Table B-4: DHCP Troubleshooting
Area to Check Explanation
DHCP is enabled on the Server. Use the DeÞne Server DHCP Enabled command.
If you manually enter an IP address, DHCP is
automatically disabled.
Make sure the DHCP server is
operational.
Check to see that the DHCP server is on and is
functioning correctly.
Did the Server get its IP address from
the DHCP server?
Refer to the DHCP Manager on your DHCP server for
information about addresses currently in use. If the
DHCP server does not list your ServerÕs IP address,
there may be a problem.