Lantronix MPS1-T Printer User Manual


 
Frequently-used Commands
F - 9
DEFINE PORT 1 FLOW
option
CTS SpeciÞes CTS/RTS (hardware) ßow control.
{EN|DIS} Activates or deactivates the currently-conÞgured
ßow-control method.
NONE Removes the current ßow control settings.
XON SpeciÞes XON/XOFF (software) ßow control.
DEFINE PORT 1 NAME newname Enter a name of up to 16 alphanumeric characters for
the speciÞed port.
DEFINE PORT 1
PARITY option
parity Enter even, odd, mark, or space. Specifying mark or
space will change the character size to 7 bits.
NONE SpeciÞes that no parity will be used (the default).
DEFINE PORT 1 SPEED baudnum Sets the portÕs baud rate. Acceptable baudnum
values range from 300 to 115200 baud (or 230000
baud for 1ooBASE-T Servers).
{SHOW|MONITOR} PORT 1 Displays the portÕs conÞguration characteristics once
(Show) or continually every three seconds (Monitor).
Counters and Status keywords can be added.
TEST PORT 1 option COUNT rows
WIDTH cols
Sends an ASCII data stream to the port for the
speciÞed number of rows and/or columns.
POSTSCRIPT Sends a PostScript test page to the port.
Table F-2: Port Commands, cont.
Command Option(s) Description