To check program settings
Press SELECT to cause PROGRAM to light up. Make the desired program No.
flash. To see program settings, press .
The button switches among programs in order starting from P-01. Program
contents are shown on the display in order starting from Sunday and the line feed
time.
To modify program settings
Press SELECT to cause PROGRAM to light up. Make the desired program No. flash.
Press , , , or to change the settings in the same manner as in its
initial setting.
To erase program settings
Press SELECT to cause PROGRAM to light up. Make the desired program No.
flash. The button switches among programs in order starting from P-01. Select
the desired program No.
To erase it, set the print column indication at "00" and press SET .
Follow the same procedure described above
to make settings for the desired program.
Example:
To erase P-04, set the print column indication at
"00" and press SET as shown in the figure at left.
DAY ADV.TIME D.S.T PROGRAM EXT.ALARM
SET
PAY ENDING
SELECT
YEAR
RED/BLK.
MONTH
EX.ALM
DAY
COL.
HOUR MINUTE SECOND/CARD
DATE/TIME
12Hr. SU TU SAFRTHWEMO
1/60
1/100
Set the print column
indication at "00".
25