Lathem FR700 Time Clock User Manual


  Open as PDF
of 6
 
9
Enroll Employee Faces
Once you have successfully updated the FaceIN FR700 with your employees,
you can begin enrolling employee faces.
a.
From the main home screen, press the
key. The Administrator must present their face.
b.
Press the
key on the keypad to access the User Management Menu.
c.
Press the
key on the keypad to Modify User.
d.
Enter the Badge Number of the employee you want to enroll and press the
key.
e.
Their name will be displayed, press the
key.
f.
Press the
key to select Face as the verify method.
g.
Enroll the employees face using the Face Enrollment Tips provided.
h.
When “Permit Open Door” is displayed press the
key.
i.
When “Permit Attendance” is displayed press the
key.
j.
Complete these steps until all employees are enrolled.
k.
Once all employees are enrolled press the
key multiple times to return to the
home screen and begin clocking employees In.
Setup Software Connection
The screens below show you the rst few steps to ensure you’re in the right
location. (For more detailed instructions see the User’s Guide).
8
a
b
a.
Open your PayClock Software on your computer.
Click on the “Terminal Manager” tab.
Then click on the “Add Terminal” button located
in the top left corner of the screen.
b.
Select “FaceIN“ and click OK to continue.
c.
Type in the name or location identier that you
want to use to identify the FR700 terminal
in the text box next to Device Nickname.
d.
In the IP Address box enter the IP Address you
entered into the FR700 and then click Save.
e.
Click the “Test Connection” button to verify the
communications between the PayClock software
and the FR700 terminal. A conrmation screen
will pop up, click OK to continue.
f.
Select the “Settings Tab” and click the “Set”
button to send the time / date to the terminal.
g.
Click on the “Update Selected Terminal”
button on the Ribbon Bar. This will send your
employee data to the FR700 device.
 previous